Stucco – a kind of decorative plaster, which is used for finishing the facade of buildings. Today, this method is very popular, so we can often notice buildings whose walls have an abstract pattern. An unusual texture of the cladding will make the facade neat and original.
Finishing with stucco is used both in residential buildings and public buildings. The bark beetle is designed to protect the building walls from bad weather conditions.
The building material perfectly resists moisture, temperature changes. Click on the link – the facades of one-story houses photo stucco, you can see the appearance of the facade in this technology.
You can finish with a stucco youself, if you know the technology of execution. It is important that the building mix is considered environmentally friendly, therefore it is possible to work with it without a respirator.
The stucco is laid on any type of wall: brick, concrete, cement, drywall, chipboard, plywood, foam and others. This makes the stucco popular among other ways of facing the facade.
After hardening, the plaster will be pleasant to the touch, despite the presence of unevenness.
Appearance definitely will please everyone – the design looks exclusive, which will give the building a charm. You can color a stucco in any color – there are no restrictions, you can choose for yourself an individual solution. Today you can meet the facades in blue, pink, yellow, green colors.
The finishing of the facades of houses with decorative plaster is carried out in such stages… It is important to thoroughly clean the surface of the facade from the presence of contaminants. Use a filler to help make the surface smooth. It is important that there are no irregularities, otherwise the result of the plaster will be unsatisfactory.
Further, the facade is covered with a primer and a light paint so that the dark color of the putty is not visible through the stucco. The stucco should fit under the primer layer. To apply stucco, use a spatula or a float. Please note: the thickness of the putty layer should not be greater than the size of the granules that are contained in the corona. Distribute the plaster on a small area, so that it is more likely to be fixed.
It is recommended to do the work together: one person applies plaster, and the second is applied by a decorative pattern. This is especially important when the wall has a large area. Be sure to remove excess, unevenness of the material. After the finish is completed go to the troweling process.
At this stage, many users feel tranquility, as the whole main process is over, and now you can take time to beauty. To make the plaster aesthetic, a grater is used. With its help, so-called lambs are formed, if you use circular grater movements. To form a rain apply direct movements.